Thru Tubing and Drillout Services
Motors, mills and thru tubing equipment for tubing cleanouts, sand and scale removal, and extended-reach frac plug millouts.
Custom-Configured BHAs Built for Your Wellbore Parameters
Whether you are clearing sand or milling frac plugs, we engineer the motor size, mill geometry, fluid hydraulics, and jar placement into a single strategy before the equipment leaves our facility.
You don’t get a list of rental parts. You get a fully optimized downhole assembly built to reach TD.
Motors, mills, jars and connectors
Coil Connectors
High torsional and tensile strength, dual seal, available for all sizes of coil and vibration-tool compatible.
- Internal Dimple Coil Connector
- External Slip-Type Coil Connector
Motors, Mills & Bits
A motor line built for milling. The all-metal variant runs where elastomers will not.
- Dan’s Torque Series Motor
- Dan’s Torque Series All-Metal Motor
- Mills
- Bits
Jars & Disconnects
Get off the string cleanly when something goes wrong. Lee and Bowen jars are on the Fishing Services page.
- Venturi Hydraulic Disconnect
- Venturi Float Sub
Extended Reach
Friction reduction and reach tools for long laterals.
- NOV Agitator
- Terra Pulse Agitator
- All Metal Extended Reach Tool
- Talon Extender
- Dyno Max Regulator Sub
Connector Options
| Connector | Type | Size range |
|---|---|---|
| Internal Dimple Coil Connector | Internal dimple | 38.1 – 60.3 mm (1.50″ – 2.38″) |
| External Slip-Type Coil Connector | External slip | 38.1 – 60.3 mm (1.50″ – 2.38″) |
| Dimple Tool | Field make-up | Matched to connector |
The connector is the one point the whole BHA hangs from: if it lets go, a drillout becomes a fishing job. Coil OD, wall thickness and whether it needs to spool decide which one.
Motor Selection
| Component | Range | Notes |
|---|---|---|
| Mud Motors | 42.9 – 101.6 mm (1-11/16″ – 4″) | Full size range held |
| Motor Head Assemblies | Matched to motor | Complete or component |
| High-Flow Milling Tools | 73 mm (2⅞″) | To 1000 L/min |
| ERT / Agitator | Multiple options | Extended reach |
We hold the motor head assemblies, bi-directional jars, shock tools, agitators, rotating and fixed nozzles and coil tubing test packers that go around the motor, so the assembly is built as a whole.
The Thru Tubing Catalogue
Coil outside diameters, wall thicknesses, yield and burst figures, motor performance curves and mill dressings are all in the Thru Tubing Catalogue.
Mill heads and drill bits
A sample of what’s on the racks.
Planning a cleanout or millout?
Tell us the well. We’ll build the assembly. Dispatch 24/7.